AircompressorAdvisor.com is participating in Amazon Affiliate program so there are affiliate links included in the pages and we earn commissions through this program and affiliate links. Read More
How To Use Air Compressor On Everstart Jump Starter
Using the compressor on an Everstart Jump Starter can be a useful and convenient way to inflate tires, especially when you're on the go or don't have access to a traditional air compressor. However, it's important to use the jump starter safely and correctly to avoid any potential hazards. In this article, I will provide you with a step-by-step guide on how to use an air compressor on an Everstart jump starter.
Step By Step Guide On Using The Air Compressor On Everstart Jump Starter:
Step 1: Check How Much Air You Need
Before you start, you'll want to check how much air your tire needs and this information can usually be found in your vehicle's owner's manual or on a sticker located on the driver's side door jamb. It's important to inflate your tire to the recommended pressure to ensure safe driving and prolong the life of your tires.
Step 2: Take The Cap Off From Your Tire
Next, you'll need to remove the cap from the valve stem on your tire as this will allow you to connect the air hose to the valve stem.
Step 3: Thread The Hose To The Tire
Once the cap is removed, thread the air hose onto the valve stem and make sure the connection is tight as well as secure to prevent any air leaks.
Step 4: Set The Desired PSI On The Jump Starter
Now it's time to set the desired PSI (pounds per square inch) on your Everstart jump starter. Most jump starters have a built-in air compressor and pressure gauge that allows you to set the desired PSI. Refer to your jump starter's user manual for specific instructions on how to set the PSI.
Step 5: Start The Jump Starter
Once you've set the desired PSI, it's time to start the jump starter. Turn on the jump starter and wait for it to reach the desired pressure. You can monitor the pressure using the built-in pressure gauge on the jump starter.
Step 6: When You Are Done Unscrew It
Once the desired pressure has been reached, it's time to unscrew the air hose from the valve stem and that's it you are done.
Using the Everstart jump starter can be a convenient way to inflate your tires on the go. Follow the above simple steps to safely and effectively use the air compressor with your jump starter. Remember to always check the recommended PSI for your tires and never exceed the recommended pressure. If you find this article helpful then share it and have a nice day.